Patented 'Starwheel' Bolt interlocks door to frame. Push bar is anodized and is easy to install. Strong durable construction for a high level of security. UL listed Fire Label up to 3 hours. California State Fire Marshall approved. New York City MEA. Warnock/Hersey Listing for fire doors up to 10 feet in height. Device is Alarmed which requires a standard mortise cylinder with an Adams Rite MS cam (not included).

The key will arm and disarm the alarm as well as reset it if the device is triggered. Four AA alkaline batteries power the twin horns to create a piercing 95db noise for 2 minutes or until disarmed when the pushbar is depressed. The device will beep to signal the need for new batteries. Grade 1, non-handed for use on fire rated outswinging doors.

The pushbar is available in a 48 inch width. Fits doors 1-3/4" thick up to 2-1/4". The pushbar is made of extruded aluminum, is stocked in Clear Anodized Aluminum Finish & includes red lettering to deter accidental actuation. Other finishes available special order.

• ANSI/BHMA:
• Grade 1
• Handing:
• Device is non-handed.
• Lever Entry Trim is field reversible.
• Pushbar Length:
• Standard Sizes:
• Dimensioned for 30", 36", 42" & 48" openings.
• Standard width bars can be field cut to the next smallest opening width.
• Door Thickness:
• Suits 1-3/4" standard, up to 2-1/4".
• Stile Width:
• 3700 - Minimum 3-3/4"
• Door construction may require additional stile width to meet fire ratings and provide adequate strength.
• Projection:
• 2-5/8" when fully projected, 1-5/8" when dogged.
• Materials:
• Pushbar made of extruded aluminum, clad or anodized in a variety of finishes.
• Dogging:
• Standard dogging with hex key or optional cylinder dogging for 8700 Series only.
• Electric dogging also available for 3700 and 8700 Series.
• Fasteners:
• Standard self-tapping screws.
• Optional Sex Bolt Kits - 26-0584 (2 required per device) Specify finish.
• Strike:
• Made of hardened steel.
• Supplied with exit device.
• Cylinders:
• Cylinder x Fixed Pull: (Functions 03)
• Accepts any standard Rim cylinder.
• Entry Lever or Thumbturn: (Functions 08, 09, 11, 12)
• Accepts any standard diameter Mortise cylinder with MS cam.
• Accommodates cylinder lengths from 1" to 1-1/4".
• Warranty:
• Five year limited.
• Starwheel Bolt:
• [1] When door closes, the interlocking noseguard and Starwheel bolt close around the strike.
• The deadlocking slide springs over, locking the Starwheel bolt to the strike.
• [2] When pushbar is depressed, the deadlocking slide moves back, allowing the door to unlock from the strike.
• This unique interlock providessolid security and preventsjamb spreading.