3600 Concealed Vertical Rod For hollow steel fire-rated doors. The 3600 provides ease and reliability demanded of a life safety device and also provides a high level of security as its top bolt dead latches around the header strike post. The bottom bolt also dead locks, triggered by the action of the top bolt.

Door preparation for the Series 3600 is simple, consisting only of drilled holes and one simple notch. No thread-tapping or cutout shapes are necessary.

Series 3600 devices are non-handed and can accommodate bar heights from 30 to 44 inches in door heights up to 8 feet. Doors with a thickness greater than 1-3/4" require a slightly modified device if cylinder lock or entry trim from the outside is desired.

Designed to fit standard gauge door skin and doubles as promulgated by the Steel Door Institute.

Bolts and Strikes:

The patented top latching mechanism utilizes a rotating Top Bolt which deadlatches around the Header Strike, interlocking the door to the frame. Supplied with Standard
Header Strike. The hexagonal, hardened steel Bottom Bolt works in harmony with the Top Bolt.

• ANSI/BHMA:
• Grade 1
• Handing:
• Device is non-handed.
• Lever Entry Trim is field reversible.
• Pushbar Length:
• Standard Sizes: Dimensioned for 30", 36", 42" & 48" openings.
• Standard width bars can be field cut to the next smallest opening width.
• Door Thickness:
• Suits 1-3/4" standard, up to 2-1/4".
• Stile Width:
• 3600 - Minimum 3-1/2
• Door construction may require additional stile width to meet fire ratings and provide adequate strength.
• Projection:
• 2-5/8" when fully projected, 1-5/8" when dogged.
• Materials:
• Pushbar made of extruded aluminum, clad or anodized in a variety of finishes.
• Dogging:
• Standard dogging with hex key or optional cylinder dogging for 8500 Series only.
• Electric dogging also available for 3600 and 8500 Series.
• Fasteners:
• Standard self-tapping screws.
• Optional Sex Bolt Kits- 26-0584 (2 required per device) Specify finish.
• Strike:
• Made of hardened steel.
• Supplied with exit device.
• Cylinders:
• Cylinder x Fixed Pull: (Function 03)
• Accepts any standard Mortise cylinder with MS cam.
• Entry Lever or Thumbturn: (Functions 08, 09, 11, 12)
• Accepts any standard diameter Mortise cylinder with MS cam.
• Accommodates cylinder lengths from 1" to 1-1/4".
• Warranty:
• Five year limited.