Enhancements have been made to the 3300 Fire-Rated Exit Device latch including an adjustable mounting plate and improved latching operation. The new design incorporates a pivoting front mounting plate that allows field setting of the latch to conform to flat or beveled edge door conditions. Loosening two screws allows the
mounting plate to pivot into position.

Two Delrin guides have also been added to the main latchbolt to reduce the force to latch while dampening the noise made when the latch contacts the strike. These changes do not affect templating.

• ANSI/BHMA:
• Grade 1
• Handing:
• Specify handing and bevel if applicable.
• Lever Entry Trim is field reversible.
• Pushbar Length:
• Standard Sizes: Dimensioned for 30", 36", 42" & 48" openings.
• Standard width bars can be field cut to the next smallest opening width.
• Door Thickness:
• Suits 1-3/4" standard. Can be modified for thicker doors.
• Stile Width:
• 3300/8300 - Minimum 5"
• Door construction may require additional stile width to meet fire ratings and provide adequate strength.
• Projection:
• 2-5/8" when fully projected, 1-5/8" when dogged.
• Materials:
• Pushbar made of extruded aluminum, clad or anodized in a variety of finishes.
• Dogging:
• Standard dogging with hex key or cylinder dogging for 8300 Series only.
• Electric dogging also available for 3300 and 8300 Series.
• Fasteners:
• Standard self-tapping screws.
• Optional Sex Bolt Kits-26-0584 (2 required per device) Specify finish.
• Strikes:
• Made of stainless steel.
• Supplied with exit device.
• Cylinders:
• Cylinder x Fixed Pull: (Function 03)
• Accepts any standard Mortise cylinder.
• Entry Lever or Thumbturn: (Functions 08, 09, 11, 12)
• Accepts any standard diameter Mortise cylinder with MS cam.
• Accommodates cylinder lengths from 1" to 1-1/4"
• Warranty:
• Five year limited.
• MODEL: 3302
• TYPE: Single Point Mortise
• RATING: 3 Hr.
• DOOR CONSTRUCTION: Hollow Metal or Wood
• MAX. SIZE SINGLE DOORS: 4'0" x 10'0"
• MAX. SIZE PAIRS, DBL. EGRESS: 8'0"x 8'0"